Services
The station that costs you the most, run by a robot.
Press brakes, machine tending, welding, finishing, and the handling between them. Designed, built, and backed under one roof in Bixby, Oklahoma, around the machines you already own.
- AnyBrake brand or tonnageInto the machine you already own.
- 176 tonBrake retrofittedA FANUC on a rail, in place, 10 foot bed.
- 8 to 5.5Minutes a cycleOne door finishing project. One result, said as such.
- 1 yearWarrantyFrom substantial completion or first production use, whichever is earlier.
What we automate
Five applications, one team that builds and backs all of them.

Robotic Press Brake Tending
The brake you own, run by a robot that follows every bend. Any brand, tonnage, or bed length.
See how it works
Robotic Machine Tending
One operator, several machines, and a spindle that stops waiting on people.
See how it works
Robotic Welding
Consistent welds start with consistent parts. We build both ends of that.
See how it works
Robotic Sanding and Finishing
The same surface on the ten-thousandth part, with nobody breathing the dust.
See how it works
Material Handling and Palletizing
The parts too big, too heavy, or too awkward to keep moving by hand.
See how it worksWalk a cell
A real press brake cell from above. Click any station to see what it does and why it is there.
Reintegration
A cell sitting dark on your floor is unfinished, not failed.
Integrators move on. Warranties outlive them. A program stops at part three because part three is where the contract stopped. That is an unfinished job, and the cheapest automation on your floor is the one that is already bolted down.
Tell us about the cell →- Read the backupsWe pull the robot and controller backups and read what the cell was taught to do, and where it stops.
- Find the defectA written defect report: what stops the cell, what it will take to finish, and what it costs. You decide whether to go on.
- Finish the commissioningPrograms cleaned up, missing parts added, safety checked, and your operators trained on the cell they already own.
- A FANUC Authorized System IntegratorIf the cell runs a FANUC robot, we can read it. If it runs something else, ask, and we will tell you straight.
- The defect, in writingThe report says what stops the cell and what it will take to finish. The decision is yours.
- Sometimes the answer is noIf the cell cannot be finished for what it is worth to you, the report says so.
How we work
Five disciplines, one roof.
Every cell above is built by the same five disciplines in Bixby, Oklahoma.
- Start on your floorEvery cell begins with a walk of your line, not with a catalog.
- Size it from your numbersYour parts, your line rates, your shifts. Not a brochure figure.
- Prove it before it shipsEvery cell is built and run as a modular skid in our Bixby shop first, so install day is short.
- Stand behind itOne year warranty, and the people who built your cell are the ones who answer when you call.
Not sure which station? Start with the Fit Check.
About a minute, with no contact information needed to see the answer. If it fits, we offer a first visit. If it does not fit yet, we say so. You decide what happens after.